null

PiXAPRO CITI600 Manual Battery Powered Flash (Witstro AD600BM)

£485.00
Write a Review

The PIXAPRO CITI 600 (Godox Wistro AD600BM) is a revolutionary battery-powered portable monolight that features a self-contained rechargeable Battery, the High-Speed Studio Powerful Stroboscopic Flash that uses Insulated-Gate Bipolar Transistor (IGBT) technology to achieve short flash durations, as well as fast recycle times, which allows you to capture fast motion such as dancing, jumping and even water splashes with ease. With a built-in receiver and a variety of different modes from HSS to the multi burst, it is perfect for people who shoot weddings, portraits, events, fashion, sports and advertising. It is especially good for shooting on location due to the flash being easily portable.

Features
  • Integrated PIXAPRO 2.4GHz ST-III Radio receiver.
  • Utilises IGBT technology for Super-Short Flash Durations, great for freezing motion.
  • High Speed Sync mode up to 1/8000th
  • High Guide Number of GN87 (at ISO 100 with Standard Reflector)
  • Large Dot Matrix LCD Display
  • 500 Full Power Flashes
  • Super-quick Recycle Times of between 0.01– 2.5 Seconds.
What’s In the Box
  • 1x CITI600 Flash Head
  • 1x Flash Tube
  • 1x Lithium Battery Pack
  • 1x Battery Charger
  • 1x Power Cord
  • 1x Lamp Cover

 

Rechargeable Lithium-Ion Battery Pack

The CITI 600 Manual has an 11.1V / 8700mAh rechargeable Lithium-ion battery pack giving approximately 500 full-powered shots per charge, perfect to keep you going throughout a shoot without the need for mains power.

 

IGBT Technology

Thanks to the Insulated-Gate Bipolar Transistor Technology used in the CITI 600 it can produce short flash durations of between 1/220 second to 1/10,000 second for sharper images whilst maintaining colour accuracy throughout its power range which opens a whole world of possibilities.

 

Automatic temperature-controlled ventilation

The CITI 600 Manual features an automatic temperature-controlled ventilation system to ensure it is safe and protected while in frequent use, the cooling fan will kick in to protect the flash when running at high temperatures.

 

9-stop Power Range in 1/3rd Stop Power Increments

The CITI600 has a 600Ws flash tube that has a 9-stop power range that can be powered down to 1/256 power of its full power in 1/3rd increments. It also includes a 10W LED modelling lamp which is equivalent to approximately 100W tungsten but runs much cooler for longer usage time.

 

Super Short Recycling Times 

This Flash has super short recycling times between 0.01 and 2.5 seconds and 16 controllable groups and 32 different channels to provide maximum flexibility and control with your flash. This Feature enables you to capture fast moving subjects such as water flashes etc.

 

User-Friendly Interface

The CITI 600’s user-friendly interface, with large Dot-Matrix LCD screen, enables you to quickly and easily change your flash settings with the use of large, easy to access buttons and a control dial. Making it easy to make the most of all the lights features.

 

Stroboscopic Multi-Flash Mode

The Stroboscopic Flash feature causes your CITI 600 Manual to fire multiple low-powered flashes in rapid succession, which can be set to between 2 and 100 flashes at a frequency between 1 and 100Hz (flashes per second), which allows you to create many different effects such as stroboscopic photography. Combined with a slow shutter speed, you can capture a sequence of images of a moving subject in one exposure just like the image above.

 

High- Speed Sync Mode

The Pixapro CITI 600 features a Hight Speed Sync (HSS) mode, which enables your flash to sync at higher shutter speeds than normal (with shutter speeds up to 1/8000 of a second) to help overpower the sun.

 

Intelligent Slave Cell

The CITI 600 features an Pre-flash detector system (intelligent slave cell) cell that can be set to ignore a Pre-Flash, which enables the use of the CITI600 alongside speedlights or any other TTL strobe

 

 

Built-in 2.4GHz Flash Receiver

The CITI 600 features a built-in 2.4GHz flash receiver, which allows it to be used in conjunction with the PIXAPRO 2.4GHz flash Triggers. This allows you to control your flash heads remotely such as flash power settings, modelling lamp on/off, changing groups & channels and Triggering.

 

Never miss a key moment with The One System

The One System allows you to communicate with our PIXAPRO flashes built-in receivers and control them all from one trigger. The 2.4GHz system will give you full functionality, compatible with Canon, Nikon, Sony, Fuji, Olympus & Pentax with full control and even high-end cameras from Hasselblad, Leica and PhaseOne with basic control.

 

 

S-Type Modifier compatibility

The PIXAPRO CITI 600 uses an S-Type accessory mount, making it compatible with a wide range of accessories and modifiers.

 

The PIXAPRO® CITi600 is a simple, easy-to-use battery powered unit which offers many features suitable for both amateur and professional photographers. This is the perfect light to give crisp sharp images whilst boasting super-fast recycle times and flash duration to capture motion for use in studio or on location. This compact and lightweight flash is perfect for people who shoot weddings, portraits, events, fashion, sports, and advertising. Thanks to its portability its especially good for shooting on location.