The PIXAPRO PIKA200 (Godox Witstro AD200) is a 200Ws compact and portable Off-camera TTL flash with a modular interchangeable-Flash-head design. This small Portable Flash gives you access to powerful flash with a guide number of up to 60m at ISO100, whilst only being pocket-sized. The PIKA200 is powered by a rechargeable battery pack, which will give you approximately 500 full-powered shots per charge. With a built-in receiver and a variety of different modes from TTL, HSS to the multi burst, it is perfect for people who shoot weddings, portraits, events, fashion, sports, fitness & advertising. Thanks to the small size and ease of portability make it especially good for shooting on location.
- Interchangeable flash heads for different lighting styles.
- Super-Fast Recycle times of between 0.01-2.1s
- Super-Fast Flash Duration up to 1/13,000 second
- High-Speed Sync up to 1/8000 second
- Built-In 2.4GHz ST-III Receiver
- Stroboscopic Flash and Rear-Curtain Sync Mode
- LED Modelling light (Speedlite Head Only)
- 8-Stop Power range (1/1 – 1/128)
- 1x PIXAPRO PIKA200 Body
- 1x Speedlite Head
- 1x Bare Bulb Head
- 1x Bare Bulb Head Flash Tube
- 1x Battery
- 1x Charger
- 1x Power Cable
- 1x Tilt Bracket
- 1x Carry Case
Fits in your Pocket.
Weighing in at 560g (without battery and Head) and just under 2kg with attachment and battery give or take and measuring 168mm x 75mm x 50mm (Without Flash Head), it can be carried in your pocket and makes it perfect for using in small spaces out of the way, great for interior photography.
Rechargeable Lithium-Ion Battery Pack
The PIKA 200 has a 14.4V/2900mAh rechargeable Lithium-ion battery pack giving approximately 500 full-powered shots per charge, perfect to keep you going throughout a shoot without the need for mains power.
Interchangeable Flash Heads
Interchangeable flash heads, enabling you to switch between a Speedlight-styled Fresnel lens (for a direct-focused beam) and a bare-bulb head (for an Omni-directional beam). This also opens a wide range of possibilities in terms of flash modifiers, meaning that it would be compatible with most modifiers designed for Speedlites as well as modifiers designed for Bare-Bulb flashes. It can also be used with the PiXAPRO Smart Speedlite Bracket for use with Studio flash modifiers.
The PIKA200 gives you access to TTL automatic metering which will quickly provide you with perfect exposure without the need for manual metering, which could sometimes cause you to miss key moments and will support Canon, Nikon, Sony, Olympus, Panasonic, and Fujifilm Cameras.
User- Friendly AV Display
With High quality and clear AV display Panel makes all the PIKA 200 functions easily accessible and adjustable
8 Stop Range in 1/3rd Stop Increments
The PIKA200 has a 200Ws flash tube that has an 8-stop power range (1/1 – 1/128 power) in 1/3rd stop power increments.
Super Short Recycling Times
The PIKA 200 has super-fast recycling times which range between 0.01 and 2.1 seconds and has 5 controllable groups and 32 different channels to provide maximum flexibility and control with your flash.
Capture motion sequences with Multi-Flash Mode
The PIKA200's stroboscopic multi-flash mode, causes your PIKA200 to fire multiple low-powered flashes in rapid succession. When combined with a slow shutter speed, you can capture motion sequences with one exposure, in-camera which can be set up to 90 flashes at a frequency of 99Hz (flashes per second).
Overpower the sun with High-Speed Sync mode
The PIKA200's high-speed sync (HSS) mode enables your flash to sync at shutter speeds higher than you camera's sync speed up to 1/8000 of a second, which allows you to overpower the sun!
Motion trail with Rear-curtain sync mode
The PIKA200 supports rear-curtain sync, which when combined with a slow shutter speed enables you to achieve more natural-looking motion-trail effects.
Capture fast-moving motion.
The PIKA200 used IGBT technology to produce short flash duration's, as quick as 1/13,000 of a second, which enables you to capture fast-moving subjects such as water splashes etc whilst still maintaining colour accuracy throughout its range opening up a whole range of possibilities.
Flash Exposure Bracketing (up to ±3 stops).
Found on all top-of-the-line flashes, flash exposure bracketing allows you to dial in the flash exposure compensation for each of three frames so that you can take three pictures in succession, each with a different amount of flash exposure compensation, and determine which amount of exposure compensation is appropriate going forward.
Built-in 2.4GHz Flash Receiver
The CITI 600 features a built-in 2.4GHz flash receiver, which allows it to be used in conjunction with the PIXAPRO 2.4GHz flash Triggers. This allows you to control your flash heads remotely such as flash power settings, modelling lamp on/off, changing groups & channels and Triggering.
Never miss a key moment with The One System
The One System allows you to communicate with our PIXAPRO flashes built-in receivers and control them all from one trigger. The 2.4GHz system will give you full functionality, compatible with Canon, Nikon, Sony, Fuji, Olympus & Pentax
The PIKA200 is the perfect Pocket size solution for the photographer that requires the power of a studio flash on location whilst being small and portable with plenty of features to boot, including rechargeable batteries, TTL and HSS. This unit is available in a variety of combination kits at great value and is suitable for people who shoot weddings, portraits, events, fashion, sports, fitness & advertising. Thanks to the small size and ease of portability make it especially good for shooting on location.